For Your Safety; Safety Instructions - Würth FLASHPAD-STEP Originalbetriebsanleitung

GB
Please read and comply with this
instruction manual prior to first use of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
Note
Modification of the device or manu-
facturing of additional devices is not
permitted. Such modifications can re-
sult in personal injury or malfunctions.
Only appointed and trained personnel may
■
carry out repairs to the device. For such
purposes, always use original spare parts
from Adolf Würth GmbH & Co. KG. This will
ensure the continuing safe operation of the
device.
The device is not designed according to the
■
ATEX regulations and must not be used in
explosive areas (e.g. painting plants).
The device may not be cleaned using high-
■
pressure water jets.
Note on the use of lamps with
IP 4x
IP 5x
IP 6x

For Your Safety

Failure to observe the instruction manual and the
safety instructions could result in damage to the
device and danger for the operator and others.

Safety instructions

Use only original Würth accessories
■
and spare parts.
-mark according to EN 60598-2-24
Environment without dust deposition
Environment with deposition of non-electrically conducting
dust
Environment with deposition of electrically conducting dust
WARNING - Prior to first use
always read the Safety
instructions!
Warning
Do not look directly at the lamp
when it is switched on - Risk of eye
injuries!
Attention!
The luminous elements of the lamp
cannot be changed by the user!
— In case of failure of your device
or illumination replacement,
please contact your vendor.
7