"Master Volume": Only essential settings such as total volume or
basic sound adjustment can be made for all group
members (
7.2.1.1 Creating a new group
1) To create a new group, call up the menu item "Tools New Group" .
2) A window is displayed: Enter the desired group name in the field
"Enter the name of the new group" .
A line for the group will be added to the list (line "Group: ...",
☞
fig . 7) .
3) The button
is used to create or change a group . It is possible to
add or remove members (Members: Select ...) and to change group
names, group types and link characteristics . A group can also be
temporarily disabled or enabled . In addition, it is possible to enter
text to describe the group .
The line "Group: ..." shows the current number of group mem-
bers (units) after the group name .
4) The button
at the end of the line "Group: ..." is used to call up
the configuration window of the group . When the configuration
window of the group is already open, this button can be used to
show a list of all group members and the button
(double-click, if necessary) . While the configuration windows of the
☞
chapter 7 .3 .4) .
to hide the list
group types "Carbon Copy" and "Advanced" are similar to those
☞
for individual units (
chapters 7 .3 .2 and 7 .3 .3), groups of the
type "Master Volume" have a specific control window (
ter 7 .3 .4) .
7.2.1.2 Deleting a group
To delete a group, click the button
☞
(
fig . 7) . A confirmation box will appear, asking you to confirm
the deletion process . If there are units assigned to this group at this
moment, another confirmation box will appear .
Fig. 7 Overview window with groups
☞
chap-
in the corresponding line
43