Sauna Maintenance - Sawo CUB3-45NB Handbuch

SAUNA MAINTENANCE

AFTER EVERY SAUNA SESSION:
It is recommended to use bench towels during sauna session to prevent sauna
9
benches getting dirty.
After sauna session, leave heater on for 30 minutes so sauna will dry faster.
9
After that, open air vents or sauna door.
Empty pail from water.
9
AT LEAST 1 -4 TIMES PER YEAR:
Remove heater stones. Clean stone dust and crumbs from bottom of the heater.
9
Repile stones and replace disintegrated ones.
Check heating elements. If there is any cracks or elements are bent, replace all
9
elements. Do not replace only one.
Wash sauna surfaces with warm water and multi-purpose detergent. Use soft
9
brush. Wash sauna benches, ceiling, floor and walls. Do not use detergent which
includes ammonia or chlorine. Rinse surfaces with cold water and ventilate sauna
room well. If needed, protect wood surfaces with wood treatment oil. Read care-
fully the instructions of wood treatment oil from product packaging.
If sauna benches are not getting clean after washing, sand the benches with sand-
9
paper. Protect benches with wood oil. Do not heat the sauna room straight after
treatment.
If there is calcium stains or other dirt on the heater cover, clean it with mild soap
9
water. You can also use SAWO Decalcifying solution for washing the stains.
Dry after wash.
Clean glass surfaces with window cleaning agent or dish soap.
9
Rinse well and dry with a squeegee or a dry cloth.
Check screws (door, sauna benches, railings). Tighten up if necessary.
9
Clean the floor drain.
9
25
ENGLISH