Control Settings (Nb-Models); Thermostat; Timer - Sawo CUB3-45NB Handbuch

CONTROL SETTINGS (NB-MODELS)

THERMOSTAT

Adjust the temperature of the sauna by simply turning the operating knob. Thermostat
support automatically the chosen temperature. In case the heater overheats, the safety
sensor will automatically stop the heater even if the timer is on. Find out for what rea-
son the heater overheated. The reason for this could be too tightly or too loosely placed
sauna stones, heater´s location or inappropriate ventilation. Exposure of the sensor
to the glowing heating element may cause sensor to overheat. Find out the reason for
overheating and fix the problem before resetting the safety sensor. The reset button
hole is located near the thermostat knob.

TIMER

The timer has 1-8 (white) hours presetting time and 1-4 (pink) hours operating time.
To start the heater at once, turn the knob to anywhere between 1-4 on the operating
time scale. The heater will start and remain on for the time selected.
To preset the timer, simply turn the knob to anywhere between 1-8. When the specific
number of hours is reached, the heater will start running and stay on for up to 4 hours
if you don't turn it off earlier.
13
DEUTSCH | ENGLISH