Turning Off The Power - Sony VPL-FHZ66 Kurzreferenz

Adjusting the tilt of the projector
with the front feet (adjustable)
When the projector is installed on an uneven
surface, you can adjust using the front feet
(adjustable).
Notes
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the front feet (adjustable) extended. It
may cause a malfunction.
Displaying a pattern for adjusting
an image
You can display a pattern for adjusting the
projected image with the PATTERN key on
the Remote Commander. Use V/v to change
the pattern and B/b to change its color.
Press the PATTERN key again to restore the
previous image.

Turning Off the Power

1
Press the ?/1 key on the main unit or
the 1 key on the Remote Commander.
The projector starts shutdown and turns
off.
2
Unplug the AC power cord from the
wall outlet.
If you need to further adjust projected
images, refer to "Projecting/Adjusting an
Image" in the Operating Instructions
contained in the supplied CD-ROM.
19
GB
Projecting