Dell PowerEdge 1655MC Anleitung Für Die Systemkonfiguration Seite 10

0w440eb1.fm Page 6 Monday, October 28, 2002 2:23 PM
1-6 System Configuration Guide
Downloaded from www.Manualslib.com
Click the Start button, point to Programs→ Accessories→ Communications, and
2
then click HyperTerminal.
Enter a name for the new connection, select an icon, and then click OK.
3
From the Connect to drop-down menu, select an available COM port, and then click
4
OK.
After you select an available COM port, the COM port properties window appears.
Configure the port with the following settings:
5
• Set Bits per second to 115200.
• Set Data bits to 8.
• Set Parity to None.
• Set Stop bits to 1.
• Set Flow control to Hardware.
Click OK.
6
In HyperTerminal, click File, click Properties, and then click the Settings tab.
7
Ensure that the Function, arrow, and Ctrl keys act as field is set to Terminal Keys.
8
Ensure that the Backspace key sends field is set to Ctrl+H.
9
Change the Emulation setting from Auto detect to ANSI or VT 100/220.
10
Ensure that this setting is the same as the setting you selected for the Console
Redirection option on the server module.
Click Terminal Setup.
11
A setting for the number of rows and columns appears.
Change the number of rows from 24 to 26 and leave the number of columns at 80.
12
If you do not have these settings, you must upgrade your terminal emulation software.
Click OK twice.
13
Press <Enter> to get the serial console logon:
14
Username = root
Password = calvin
You are logged in to the remote access features on the system management module.
manuals search engine