Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
D811_IFU_EN.fm Page 13 Friday, September 7, 2007 8:01 PM
Downloaded from
www.Manualslib.com
OK
6. Re-enter the new PIN and press
.
Back
7. Press
to return to the previous menu level or
to return
>
to standby.
Restore default settings
You can restore your D801 to its default (original) settings.
It will not affect the phonebook, calls list or user's data, including
personal/recorded outgoing messages and answer machine
messages. All handsets registered to the base will be retained.
All text, answer machine, handset and base settings will be reset.
Menu
Settings
Select
1. Press
, scroll
to
and press
.
d
Set Base
Select
2. Scroll
to
and press
.
d
Master Reset
Select
3. Scroll
to
and press
.
d
Yes
No
4. Select
to confirm or
to cancel.
OK
5. Enter the system PIN (original setting 0000) then press
Reset Compete
The display will show
and the unit will restart.
If the welcome mode is available then the user is presented
with the country selection screen. Please refer to welcome
mode section.
ECO mode
To reduce the level of power emissions, you can select low
On
power or ECO mode. When the ECO mode is set to
, the
base transmission power will be reduced.
On
Off
To turn ECO Mode to
or
:
Menu
Settings
Select
1. Press
, scroll
to
and press
.
d
Set Base
Select
2. Scroll
to
and press
.
d
ECO Mode
Select
3. Scroll
to
and press
.
d
On
Off
Select
4. Press
or
to highlight
or
then press
to
u
d
confirm.
Set to ON
Set to OFF
The display will show
or
depending on the
selection together with a confirmation tone.
Signal icon in
ECO mode
ON
When
set to
,
icon is displayed in place of the standard
signal icon.
NOTE
ON
When ECO mode is set to
, the handset range will be reduced.
Clock & alarm
manuals search engine
6. Clock & alarm
Date & time
If you subscribe to your network's caller display service, the
base sets the date and time for all handsets whenever a call is
received. You can manually set the time on an individual
handset.
Menu
Clock & Alarm
Select
1. Press
, scroll
to
and press
d
Date & Time
Select
2.
is highlighted, press
.
3. Enter the date using the format DD/MM/YY.
Save
4. Enter the time and press
.
Back
5. Press
to return to the previous menu level or
>
return to standby.
.
Set alarm
When the alarm is set, the display shows the
icon.
Each handset can have a different alarm setting.
Menu
Clock & Alarm
Select
1. Press
, scroll
to
and press
d
Alarm
Select
2. Scroll
to
and press
.
d
On
Select
3. Press
or
to select
and press
.
u
d
Once
Monday-Friday
On Daily
4. Press
or
to select
,
or
u
d
Select
press
.
Save
5. Enter the time you want the alarm and press
.
Back
6. Press
to return to the previous menu level or
>
return to standby.
Once
If the alarm was set to
, the
will disappear from the
screen.
On Daily
Monday-Friday
If set to
or
, the
will remain on the
screen.
Alarm on /off
Once an alarm has been set, you can switch the setting On or
Off.
Menu,
Clock & Alarm
Select
1. Press
scroll
to
and press
d
Alarm
Select
2. Scroll
to
and press
.
d
On
Off
Select
3. Press
or
to select
or
and press
.
u
d
Back
4. Press
to return to the previous menu level.
Switch off alarm ring
Stop
When the alarm goes off, press
.
If you are using the handset to make a call when the alarm ring
is due, the
flashes and you hear a beep in the earpiece.
Time format
Set the time format to 12 or 24 hour setting.
Menu
Clock & Alarm
1. Press
, scroll
to
and press
d
Time Format
Select
2. Scroll
to
and press
.
d
12 Hour
24 Hour
3. Press
or
to select
or
and press
u
d
Back
4. Press
to return to the previous menu level.
.
to
.
and
to
.
Select
.
Select
.
13
Werbung
Kapitel
Inhaltsverzeichnis
