Omnitronic EMX-3 Bedienungsanleitung Seite 17

20 AC connection
Plug in the supplied power unit here.
21 ZONE
Stereo output (RCA, unbal.) for connecting a further
amplifier, e.g. for the monitoring system or PA application
in a secondary room.
22 Output REC(CORD)
Stereo output REC(CORD) (RCA) for connecting a
recording unit. The recording level is independent of the
position of the master fader and the output control ZONE.
23 Master output, bal.
Stereo master output (6.3 mm jack, bal.) for connecting
an amplifier. The output can be switched to mono by
pressing the selector switch MONO at the front panel.
24 Input selector switches
Switches the phono inputs to line inputs.
Downloaded from www.Manualslib.com manuals search engine
25 GND (ground terminal)
Ground clamping screw for turntables connected to
channel 2 and channel 3.
26
Inputs PHONO
Stereo inputs PHONO (RCA) for channel 2 and channel 3
for connecting turntables with magnetic system.
27 Microphone input
6.3 mm jack for connecting a microphone.
28 Inputs LINE
Stereo inputs LINE (RCA) for channel 1 to 4 for
connecting units with line level outputs (e.g. CD players).
29 Master output, unbal.
Stereo master output (RCA, unbal.) for connecting an
amplifier. The output can be switched to mono by
pressing the slector switch MONO at the front panel.
Cable clamp
30
17/21 00040959.DOC, Version 1.0