Operation And Functions - TaoTronics SoundLiberty 88 Bedienungsanleitung

is heard. The pairing history is then cleared with the earbud off.
3. Uncover the lid, take out the other earbud, press and hold its Multifunction
Touch Control for 10 seconds until a toot sound is heard. The pairing history
is then cleared with the earbud off.
4. Put both earbuds back into the charging case, close the lid, then uncover it
to re-pair with your Bluetooth® device as instructed in "Pairing" section.
Note:
If you want to pair the earbuds with another device when you have already
paired them with a device, deactivate the Bluetooth function on the paired
device or clear "TAOTRONICS SoundLiberty 88" from its Bluetooth list. Restore
the earbuds to factory settings as instructed above if pairing failed.

OPERATION AND FUNCTIONS

Function Operation
• Tap the Touch Control on either
of the earbuds twice under music
Play / Pause
• Put on / take off the earbuds
Tap and hold the Touch Control
Volume +
on the right earbud for more
than 3 seconds
Tap and hold the Touch Control
Volume -
on the left earbud for more
than 3 seconds
07
Voice Prompt
/
Toots when highest setting
is reached
/
Tap the Touch Control on the
Next Track
right earbud three times
Tap the Touch Control on the
Previous Track
left earbud three times
• Tap the Touch Control on
Answer Phone
either of the earbuds once
Call
• Put on both earbuds
Hang up
Tap the Touch Control on
Phone Call
either of the earbuds twice
Tap and hold the Touch
Decline an
Control on either of the
Incoming Call
earbuds for 2 seconds
When paired successfully,
tap and hold the Touch
Turn On / Off
Control on either of the
Voice Control
earbuds for 2 seconds until a
beep is heard
Clear Pairing Refer to the "Clear Pairing
List List" section
Go into Pairing
Refer to the "Pairing" section
Mode
Successfully
/
paired with
your device
/
/
/
/
Call rejected
Toot
/
Pairing
Connected
08