TaoTronics SoundLiberty 88 Bedienungsanleitung Seite 7

Power Off (Fig. 8)
Put the earbuds into the charging case and close the lid, they will turn off
automatically.
8
L
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10
minutes, they will turn off automatically.
Couple Earbuds Mode
1. Uncover the lid to turn on the earbuds, they will connect with each other
automatically. The LED indicators on both earbuds will flash quickly in
white indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find "TAOTRONICS SoundLiberty 88" in the searching results, tap
on the name to connect.
3. Once connected, the LED indicators on both earbuds will turn off.
05
R
Note:
• The earbuds can remember the devices paired previously, and will attempt
to pair with the last connected device. If re-pairing failed, the earbuds will
enter pairing mode.
• It is not recommended to wear the two earbuds on different people. If
necessary, please keep the two earbuds close to each other in couple
earbuds mode.
Single Earbud Mode
Single Earbud Mode is available only when the earbuds have been paired
with your device in Couple Earbuds Mode.
1. Take out one earbud from the charging case, and make sure the other one
is placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device in Couple Earbuds Mode. Once
connected, the LED indicator on the earbud will turn off.
3. If pairing failed, re-pair both earbuds with your Bluetooth® device first as
instructed in "Couple Earbuds Mode" section.
Note:
If you want to change to couple mode, simply take out the other earbud
from the charging case, they will pair with each other automatically.
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing
history as instructed below:
1. If you have paired your device with the earbuds before, remove
"TAOTRONICS SoundLiberty 88" from the Bluetooth device list first.
2. Take out one of the earbuds, and make sure the other one is placed in the
charging case and the lid is covered. Wear the earbud, press and hold the
Multifunction Touch Control of the earbud for 10 seconds until a toot sound
06