Symbols Used; Liability And Warranty; Accident Prevention And Safety; Safety Instructions - Schwamborn BAS 1500E Originalbetriebsanleitung

EN Power trowel BAS 1500V / BAS 1500E
1 Important informations

1.2 Symbols used

The following symbols are used in this
documentation:

Safety instructions

This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some of the safety instructions are
accompanied by corresponding symbols.
Warning
Additional note
This symbol indicates additional information.

1.3 Liability and warranty

Liability or warranty is excluded if:
— The instructions in the operating manual have
not been observed.
— The machine or its attachments were improperly
operated.
— The maintenance was carried out inadequately
or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used, has
been altered or was removed.
— The specified power supply ratings and sur­
rounding conditions have not been observed.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer's permission. Any
such actions will void the warranty.

1.4 Accident prevention and safety

All laws and regulations (e.g. the valid regulations on
waste disposal), accident prevention guidelines and
generally recognised safety rules must be complied
with when working on and with the machine.
10
Direction
Prohibition
The following instructions comply with legislation, di­
rectives and publications such as:
— EU Machinery Directive
— EU Product Liability Directive
— Law governing technical materials
— Law governing equipment safety
— Law governing product liability
This operating manual is intended for operators and
tool setters, as well as for the personnel that service,
maintain and repair the machine. Together with all
the technical documentation, it is intended to help
— avoid hazardous situations
— use the machine for its intended applications
— avoid downtime and repair costs
— maintain the function of the machine
— increase the service life of the machine
The manufacturer and owner of the machine must
observe the contents and provisions of the EC direc­
tives. The effectiveness of any measure ultimately
depends on how well all parties, i.e. the manufac­
turer, the owner and the machine operators, work
together to uphold safety standards.
1.5 Safety instructions
This machine incorporates state of the art technology
and has been built in accordance with recognised
safety regulations. This ensures that the highest pos­
sible standards of occupational safety are main­
tained. However, incorrect use of the machine could
endanger personnel or cause material damage.
The machine may only be operated by people
who have been assigned to do so and who have
the appropriate training and skills!
A general inspection of the machine must be
conducted before starting up the machine! Pay
particular attention to damaged or loose compo­
nents, and to wear!
The machine may only be put into operation if it
is in perfect technical condition!
Adding to or modifying the machine in any way
that could compromise operating safety is pro­
hibited!
If any defects are found in the machine that
could endanger people or damage property,
stop the machine immediately and make sure
that it cannot be used again until all repairs have
been completed!