Rear Side - AER acoustic-line Serie Bedienungsanleitung

rec out aux in
1
20120705

3.2 Rear Side

1) rec out: stereo output with equalizer, effect,
stereo-reproduction of ext. effect, aux in and
stereo simulation (switchable), Cinch/RCA-
sockets (white = left channel, red = right
channel)
2) aux in: stereo input for additional signal
sources, e.g. CD-player, Cinch/RCA-sockets
(white = left channel, red = right channel)
3) headphones: stereo-headphones socket
4) tuner: tuner output socket (mono, -10 dbV)
pre master
5)/6) L-out/R-out: stereo output with equalizati-
on, effects, stereo-reproduction of external
effect, aux in and stereo-simulation (switcha-
ble), 6,3 mm jack socket
7) insert: insert point, 6,3 mm stereo-jack-plug,
tip = send, ring = return, for serial looping of
effect-devices or for connecting AER-amps
with link-feature. (see para. 5.6, page 10)
14
headphones tuner L-out
headphones tuner L-out
2 3 4
C AU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
C AU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
!!! Warning: Only use
headphones with stereo
jackplugs in this output
socket!!!
R-out insert line-out
R-out insert line-out
5 6 7 8
Domino
Domino
Made in Germany by
B
Made in Germany by B
8) line out: signal output e.g. for active louds-
peakers, 6,3 mm mono jackplug, sum signal
with equalization and effects, post master
9) DI-out: signal output, symmetrcal, XLR-
female-socket, without equalization and
effects, pre master
10)/11) ext. effect send/return: loop point with
mono jackplugs for an external effect-device
or other signal sources. return and send
together form an effect loop path. The effect
can be switched on or off by a standard
footswitch.
12) footswitch effect on/off: Stereo connector
socket for a double-footswitch (on-/off-
switch, tip = internal effect/ring = external
effect on/off ).
13)/14) footswitch mute channel 1/2 + 3/4:
Stereo connector socket for a double-
footswitch, mute input 1/2 (tip = input 1,
ring = input 2) resp. mute input 3/4 (tip =
input 3, ring = input 4).
15) power on: Combined mains switch with
mains socket and fuse holder. (s. Technical
Data Mains Fuse)
1 = gnd return effect on/off mute channel 3/4
ext. effect footswitch
2 = pos
3 = neg
send mute channel 1/2
DI-out
10
9 11 12
1 = gnd return effect on/off mute channel 3/4
2 = pos
3 = neg
2.
2.
power on
power on
13
14
A
A
15