Insert-Loop - AER acoustic-line Serie Bedienungsanleitung

5.6 Insert
The insert-loop is an in-/output on a stereo-socket to link different effect-
devices (EQ, compressor etc.) in serial mode with tip = send (input) and ring
= return (output). This configuration allows several more applications, such
as:
1. use as additional line-output
2. use as additional line-input
3. link between two or more AER-amps with insert-feature (AG8, Domino,
Compact ClassicPro)
For each of these applications you'll need the appropriate cable connection,
e.g. use as line-output: stereo-jack (tip and ring = hot, sleeve = ground) to
mono-jack.
The particular AER-link-application (s. no. 3 - link between AER-amps) is
represented on page 11. In link-operation it is assured, that the signals of
all connected amps are hearable on all devices, even with different effect
settings. You just have to be aware, that the different levels depend on each
other.
This setting (in combination with active loudspeakers, pre master-function)
works as a complete and easily operated reinforcement/monitor system.
18