Menu For Speed Limit; Error Code; Factory Settings - SXT-Scooters Light GT Handbuch

2.3 MENU FOR SPEED LIMIT

Switch off scooter (on/off switch)
•
Press and hold thumb brake
•
Switch on the scooter (on/off switch)
•
The display will show "L1"
•
Move to menu with button [LIGHT] L1-L2-L3-L4-L5
•
L1= Limit the speed to 6 km/h
L2= Limit the speed to 12 km/h
L3= Limit the speed to 20 km/h
L4= Limit the speed to 25 km/h
L5= Max. speed
To set up a new speed limit, press button[SET]
•
To finish the settings, release the thumb brake.
•
2.4 KICK START
Switch on the scooter (on/off switch)
•
Press and hold thumb brake
•
Press the on/off switc
•
The display will show "P1"
•
To turn the Kick Start function on or off, press the [SET] button
•
To finish the settings, release the thumb brake.
•

2.5 ERROR CODE

E1: Overcurrent protection (Motor does not move more
than 4 seconds)- this error clears after release the
acceleration throttle. If not clear, send to service.
E2/E4: Communication error (No communication for
more than 400ms) - this error clear when starting the
communication. If not clear, send to service.
E3: Overvoltage error (Battery voltage higher).
Put back original battery, other hardware
problem.
Black-Screen: Exposure under the sun for too long.
Place it in shadow and it will return to normal after a period of time. If not clear, send to service.
Display
31
%