Nabo 55 ST6600 Bedienungsanleitung Seite 47

MEMC Demo
Film Mode
Skin Tone
Colour Shift
Gamut Mapping
HDMI Full Range
Reset
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu
while in PC mode.
Sound Menu Content
Dolby Audio
DTS TruSurround
Sound Output
AVL (Automatic
Volume Limiting)
(Optional)
Advanced Settings
Equalizer
Dynamic Bass
DTS DRC
Digital Out
Headphone/
Lineout
When MEMC option is set to Low, Medium or High, this option will be available. Press
OK button to activate the demo mode. While demo mode is active, the screen will be
divided into two sections, one displaying the movie sense activity, the other displaying
the normal settings for Display screen. Press OK button again to cancel.
Films are recorded at a different number of frames per second. Turn this feature on
when you are watching films to see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
You can use this option to set the range of colours displayed on your
When set as On, colours are set according to the source signal. When set as Off, the
Display 's maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the Display model and its features.
While watching from a HDMI source, this feature will be visible. You can use this feature
to enhance blackness in the picture.
Resets the picture settings to factory default settings (except Game mode).
Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than Off.
Enables or disables the DTS TruSurround.
Sets the sound output preference. Display, S/PDIF and HDMI ARC options will be
available. There will be no sound output except through the selected option. If HDMI
ARC option is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as grayed out and will be
unavailable.
Sets the sound to obtain fixed output level between source input options.
If the Dolby Audio menu item is set to an option other than Off the AVL setting options
will change. Auto, Night, Normal and Off options will be available. In Auto mode the
Display will switch to Normal or Night mode automatically according to the current time
information. If no time information is available this option will always function as Normal.
When the Display switches to Night mode for the first time after setting this option as
Auto, an information bar will pop up on the screen.
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Selects the equalizer mode. Custom settings can be made only when in User mode.
Enables or disables the Dynamic Bass.
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the DTS DRC by setting as On or Off.
Sets digital out audio type.
When you connect an external amplifier to your Display using the headphone jack, you
can select this option as Lineout. If you have connected headphones to the Display,
set this option as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing.
English - 14 -
Display screen.