EN Floor Treatment Machine
ES 51S / ES 51S3 / STR 701L / STR 702S / STR 500
1 Important notes
1 Important notes
The machine may only be used with task-specific
accessories supplied by the manufacturer for:
—
Cleaning
—
Polishing
—
Burnishing
—
Stripping
—
Wet and dry grinding
—
Smoothing, grouting (STR 701L / STR 702S)
of even, level floor surfaces such as:
—
Cement
—
Screeds
—
Synthetic resin screeds / asphalt
—
Natural stone floors
—
Residual adhesive or filling compound
—
Floor remnants (e. g. foam backing)
—
Wooden floors
Any other use of the machine can lead to
dangerous situations and is prohibited!
To ensure correct use of the machine, follow the
instructions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!
Before using the machine, the
operating personnel must carefully
read and understand this operating
manual!
Keep this operating manual close
at hand for easy reference!
Read and observe documents and operating manuals
provided by suppliers!
If the machine is on loan to other parties, the
operating manual must be provided with the
machine and its importance must be made clear!
The illustrations are of the ES 51S floor
treatment machine.
Deviations from the ES 51S3 / STR 701L /
STR 702S floor treatment machines are noted in
the text.
1.1 Customer service and spare parts
In case of customer service queries, replacement
parts or repairs, please contact the manufacturer. To
ensure your queries are dealt with as quickly as
possible, always quote your machine data. These are
located on the machine s nameplate.
16
1.2 Liability and warranty
Schwamborn Gerätebau GmbH
All rights, including those pertaining to
translation, lie with Schwamborn Gerätebau
GmbH.
No part of this documentation may be reproduced,
used or distributed in any form without the written
permission of Schwamborn Gerätebau GmbH.
Liability or warranty is excluded if:
—
The instructions in the operating manual have not
been observed.
—
The machine or its attachments were improperly
operated.
—
The maintenance was carried out inadequately or
incorrectly.
—
Specified spare parts were not used.
—
The protective equipment was not used, has been
altered or was removed.
—
The specified power supply ratings and
surrounding conditions have not been observed.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the
machine without the manufacturer s permission. Any
such actions will void the warranty.
1.3 Symbols used
The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Warning
Prohibition
Additional information
This symbol indicates additional information.
The ES 51S / ES 51S3 / STR 701L / STR 702S
"
floor treatment machine is referred to as the
machine in this operating manual.
Direction