Instar IN-MOTION 500 Installationsanleitung Seite 21

Ӽ Dip Switch
DIP1
LED Status during Alarm
ON: LED signals alarm events (default)
OFF: LED is deactivated during alarm
DIP2
PIR Sensitivity Switch
ON: Standard sensitivity needs more then one detection to
trigger an alarm to minimize false positives (factory default)
OFF: Deactivate false alert compensation for a higher
sensitivity.
DIP5
ON: AND Mode
detect a motion to trigger an alarm (factory default)
OR Mode
OFF:
an alarm.
DIP3 DIP4 DIP6
Ӽ Tamper Switch
The Tamper switch protects the enclo-
sure against unauthorized opening or
sabotage. To use the Tamper switch,
please make sure to bridge C1/ T2 with
NC and connect T1 & C to the NC
operated alarm input of your camera.
Pls check http://motion500.instar.com
for more details.
Downloaded from www.Manualslib.com
- both Microwave and PIR have to
- either PIR or Microwave can trigger
These switches are not used.
Use is OPTIONAL
manuals search engine
4
-EN
Tamper Switch