SPORTSTECH HTX100 Handbuch Seite 33

Step 12:
Attach the console base (#20) to the frame tube (#1). Then use the connection spring (#21) to connect the small hole
in the jumping blanket to the console. Connect the cable to the console and place the console (#19) in the fixed console
base (#20). Manually change the spring length and test the console to see if it works properly. If so, fasten it with the
self-tapping screw ST3*25 (#31).
Figure 13
Step 13:
Now fasten the drink holder (#26) with the correspon-
ding tapping screws ST4*15 (#25)
26
Figure 14
Figure 15
Step 14:
Attach the mobile phone holder (#27) to the handle
(#11).
33
EN