Remote Control - novaer K3 Benutzerhandbuch

REMOTE CONTROL

Please insert two type AAA batteries into the remote control.
1. SPEED
This button regulates the ventilation speed which can only be used in fan, heating and
cooling mode. Press this button to adjust to either higher or lower speed.
2. INCREASE TEMPERATURE
Press this button for increasing the temperature in the cooling mode.
3. SELECT MODE
Press this button for selecting between the different modes: cooling, heating, fan and
dehumidifying.
4. SLEEP
While in cooling mode, press the SLEEP key to set the temperature. It increases 1°C after
an hour and at most increases 2°C after 2 hours.
While in heating mode, press the SLEEP key to set the temperature. It decreases 1°C after
an hour and at most decreases 2°C after 2 hours.
Press the SLEEP key again can cancel the setting.
5. DECREASE TEMPERATURE
Press this button for decreasing the temperature in the cooling mode.
Page 8 of 33 V 2003