novaer K3 Benutzerhandbuch Seite 3

Please read the additional WARNING remarks carefully!
•
This appliance contains 215 g (see rating label back of unit) of R290 refrigerant gas.
•
R290 is a refrigerant gas that complies with the European directives on the
environment. Do not puncture any part of the refrigerant circuit!
•
If the appliance is installed, operated or stored in a nonventilated area, the room
must be designed to prevent to the accumulation of refrigerant leaks resulting in a
risk of fire or explosion due to ignition of the refrigerant caused by electric heaters,
stoves, or other sources of ignition.
•
The appliance must be stored in such a way as to prevent mechanical failure.
•
Individuals who operate or work on the refrigerant circuit must have the
appropriate certification issued by an accredited organization that ensures
competence in handling refrigerants according to a specific evaluation recognized
by associations in the industry.
•
Repairs must be performed based on the recommendation from the
manufacturing company. Maintenance and repairs that require the assistance of
other qualified personnel must be performed under the supervision of an
individual specified in the use of flammable refrigerants.
•
Never insert any objects into the air conditioner! This is very dangerous as the
fan rotates on high speed. High risk of injury!
•
Never cover the air intake and the air output areas of the portable air conditioner!
The air must circulate freely around the unit without any possibility of blockage.
•
The appliance must stand on a flat and stable surface so that water leakages can
be avoided. Please ensure a minimum distance of 50 cm away from the wall or
any other obstacles!
•
The unit is equipped with a compressor overload protection system, whereby the
compressor only starts once 3 minutes have elapsed from its previous stoppage.
•
Please wait at least 3 minutes before starting the unit. This helps to prevent the
compressor from being damaged.
•
If the product seems to have problems, turn the appliance off and unplug the
unit from the socket. Never try to fix the product on your own and contact either
the manufacturer or the service partner for technical support.
Page 3 of 33 V 2003