Seite 3
Elanslutning Allmänt Montering Nivåvakten NV 10 används när de lokala förutsätt- Montering sker enligt följande. ningarna eller bestämmelserna kräver en utökad kon- ■ Skruva fast nivåvakten i nivåkärlets öppning. troll av köldbärarens täthet. ■ I vissa fall kan denna visa sig vara för trång för flot- tören.
Seite 4
Elinkoppling av NV 10 i FIGHTER 1115/1120 Demontering av luckor FIGHTER 1115 FIGHTER 1120 Inkopplingen sker enligt följande: Inkopplingen sker enligt följande: ■ Ställ värmepumpens strömställare (8) i läge ”0”. ■ Ställ värmepumpens strömställare (8) i läge “0”. ■ Demontera luckorna på FIGHTER 1115 enligt ■...
Seite 5
Elinkoppling av NV 10 i FIGHTER 1115/1120 Elanslutning FIGHTER 1215 FIGHTER 1220 Inkopplingen sker enligt följande: Inkopplingen sker enligt följande. ■ Ställ värmepumpens strömställare (8) i läge ”0”. ■ Ställ värmepumpens strömställare (8) i läge “0”. ■ Demontera den övre frontluckan på FIGHTER ■...
Seite 7
Installation A level monitor must be installed if there is a demand The level monitor NV 10 is to install as follows: or request from the local authorities for extended con- ■ Screw the level monitor into the level vessel.
Seite 8
Electrical connection of NV 10 with FIGHTER 1110/1120 Removal of covers FIGHTER 1110 FIGHTER 1120 Connection to be done as follows: Connection to be done as follows: ■ Shut down FIGHTER 1110 by turning the power ■ Shut down FIGHTER 1120 by turning the power switch (8) to “0”.
Seite 9
Electrical connection of NV 10 with FIGHTER 1110/1120 Elanslutning FIGHTER 1210 FIGHTER 1220 The connection is to be done as follows: Connection to be done as follows: ■ Shut down FIGHTER 1210 by turning the power ■ Shut down the FIGHTER 1220 by turning the switch (8) to “0”.
Beim Einschrauben des Geberrohres ins Niveaugefäß ist Vorsicht geboten. Der obere und untere Niveau- Klemmring dürfen nicht verschoben werden. Niveauwächter NV 10 Art. Nr. 089315 Bausatz Niveauwächter 1 Stück Kabelbinder 2 Stück Niveaugefäß mit eingebautem Niveauwächter NV 10 sowie Sicherheitsventil. NV 10...
Seite 12
Elektrischer Anschluss des NV 10 im FIGHTER 1110/1120 Demontierung der Luken FIGHTER 1110 FIGHTER 1120 ■ Betriebswahlschalter (8) auf Stufe „0“ schalten. Das Anschließen geschieht wie folgt: ■ Die Luken des FIGHTER 1120 gemäß Abbildung ■ Dreistufenschalter (8) auf Stufe "0" schalten.
Seite 13
Elektrischer Anschluss des NV 10 im FIGHTER 1110/1120 11 Elanslutning FIGHTER 1210 FIGHTER 1220 Das Anschließen geschieht wie folgt: Das Anschließen geschieht wie folgt: ■ Dreistufenschalter (8) auf Stufe "0" schalten ■ Betriebswahlschalter (8) auf Stufe „0“ schalten. ■ Die obere Frontluke des FIGHTER 1210 demontie- ■...