Surface Temperature Measurement; Maintenance - PANCONTROL PAN IR-T42 MED Bedienungsanleitung

Surface temperature measurement:

You can also use the PAN IR-T42 MED to measure the temperature of an area
or object as well as the room temperature.
1. Set the function selector switch to the position "Surface"
2. Aim with the device on the surface to be measured and press the
measuring button (trigger). Wait until the value on the display has
stabilized, and read off the measured value.
If "HI" or "Lo" appears in the display, the measured value is outside the
measuring range.

9. Maintenance

Only authorized service technicians may repair the instrument.
Changing the battery(s)
Replace the battery(s) when the battery symbol or BATT is displayed on the
LCD.
Note:
After inserting new batteries, the device takes a few minutes to adjust to
room temperature.
1. Open the battery compartment.
2. Replace the spent battery with a new one - note the correct polarity
Incorrectly inserted batteries can damage the device!
Do not use rechargeable batteries!
3. Close the battery compartment.
4. Disposal of the flat battery should meet environmental standards.
22
English