Repair And Warranty - Megger BM100/4 Gebrauchsanleitung

Vorschau ausblenden

Seite von 12

/ 12
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Supplied

Optional

Publications

The instrument circuit contains static sensitive devices, and care must be taken

in handling the printed circuit board. If the protection of an instrument has been

impaired it should not be used, and be sent for repair by suitably trained and

qualified personnel. The protection is likely to be impaired if, for example, the

instrument shows visible damage, fails to perform the intended measurements,

has been subjected to prolonged storage under unfavourable conditions, or

has been exposed to severe transport stresses.

N o t e : Any unauthorized prior repair or adjustment will automatically invalidate

Instrument Repair and Spare Parts

For service requirements for M E G G E R ® Instruments contact :-

AVO INTERNATIONAL

Archcliffe Road

Dover

Kent, CT17 9EN

England

Tel: +44 (0) 1304 502243

Fax: +44 (0) 1304 207342

or an approved repair company.

Approved Repair Companies

Anumber of independent instrument repair companies have been approved for

repair work on most

spare parts. Consult the Appointed Distributor / Agent regarding spare parts,

repair facilities and advice on the best course of action to take.

Returning an Instrument for Repair

If returning an instrument to the manufacturer for repair, it should be sent freight

pre-paid to the appropriate address. Acopy of the Invoice and of the packing

note should be sent simultaneously by airmail to expedite clearance through

Customs. A repair estimate showing freight return and other charges will be

submitted to the sender, if required, before work on the instrument

c o m m e n c e s .

Downloaded from

www.Manualslib.com

Test lead set

User Guide

Synthetic Test & carry case

Test lead set (2 leads, 2 clips)

Test lead set with fused prods.

(Not recommended for continuity tests).

'A Stitch in Time'