Mitsubishi FX2N Serie Hardwarehandbuch Seite 5

FX
2N
ENG
Downloaded from www.Manualslib.com
Series Programmable Controllers
Guidelines for the safety of the user and protection of the FX
This manual provides information for the installation and use of the FX
has been written to be used by trained and competent personnel. The definition of
such a person or persons is as follows;
a)
Any engineer who is responsible for the planning, design and construction of
automatic equipment using the product associated with this manual should be of
a competent nature, (trained and qualified to the local and national standards
required to fulfill that role). These engineers should be fully aware of all aspects
of safety with regards to automated equipment.
b)
Any commissioning or service engineer must be of a competent nature, trained
and qualified to the local and national standards required to fulfill that job. These
engineers should also be trained in the use and maintenance of the completed
product. This includes being completely familiar with all associated documentation
for the said product. All maintenance should be carried out in accordance with
established safety practices.
c)
All operators of the completed product should be trained to use that product in a
safe and co-ordinated manner in compliance to established safety practices. The
operators should also be familiar with all documentation which is connected with
the actual operation of the completed equipment.
Note: the term 'completed equipment' refers to a third party constructed device which
contains or uses the product associated with this manual.
Note's on the symbology used in this manual
At various times through out this manual certain symbols will be used to highlight points
of information which are intended to ensure the users personal safety and protect the
integrity of the equipment. Whenever any of the following symbols are encountered,
its associated note must be read and understood. Each of the symbols used will now
be listed with a brief description of its meaning.
Hardware warnings
1)
Indicates that the identified danger WILL cause physical and property damage.
2)
Indicates that the identified danger could POSSIBLY cause physical and prop-
erty damage,
3)
Indicates a point of further interest or further explanation
Software warnings
4)
Indicates special care must be taken when using this element of software
5)
Indicates a special point which the user of the associate software element should
be aware of
6)
Indicates a point of interest or further explanation
manuals search engine
2N
. The manual
2N
ii