Wiseup W8200 Handbuch Seite 4

V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a proper PC computer USB port.
5.3. The camera will be recognized as a removable disk drive.
5.4. Click on the drive in the root directory and inside the root directory, open the file
named "time.txt".
5.5. Write the current date and time in the "time.txt" file with the correct format:
[date]
YYYY-MM-DD HH:MM:SS Y 1
For example:
[date]
2017-04-12 14:24:32 Y 1
Save this file.
5.6. If you need the camera to record video at a lower resolution, you can change 1
into 2 or 3 in the "time.txt" file. 1 stands for 1920x1080P, 2 for 1280x720P and 3 for
640x480.
5.7. If you don't need the time stamp on the video footage, change "Y" into "N" in the
"time.txt" file.
For example:
[date]
2017-04-12 14:24:32 N 2
5.8. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera and connect the camera to an outlet AC power supply
using the DC5V power adapter and the USB cable provided.
6.2. Both red and blue indicator lights will stay illuminated during the charging pro-
cess.
6.3. It will take 40 minutes to obtain a full charge.
6.4. The red indicator light will turn off and the blue one will stay illuminated when the
camera is fully charged.
VII. Resetting
If for any reason, the camera stops responding or isn't working properly, a quick
reset will restore it back to normal operation.
Downloaded from www.Manualslib.com manuals search engine