MACHEREY-NAGEL NANOCOLOR Gebrauchsanweisung Seite 2

Instructions for use of
Ready position 1
1st stop
2nd stop
1st stop
(to fill)
Not suitable for viscous solutions or solutions with high steam-pressure!
Depress the push
button to the first stop.
Immerse the tip slightly
below the surface of
the solution (2–3 mm).
Reference: ISO 8655 „Piston-operated volumetric apparatus"
MACHEREY-NAGEL GmbH & Co. KG · Neumann-Neander-Str. 6–8 · 52355 Düren · Germany
Tel.: +49 24 21 969-0 · Fax: +49 24 21 969-199 · info@mn-net.com · www.mn-net.com
digital piston pipettes
1. Setting volume
To increase the delivery volume turn the push
button counter-clockwise and to decrease turn
clockwise. Make sure the desired delivery vol-
ume clicks into place and the digits are com-
pletely visible.
2. Filling
Depress the push button to the first stop (1).
Immerse the tip slightly below the surface of the
solution and release the push button slowly (2).
The tip has now been filled. Withdraw the tip
from the solution. Wipe any drops from the out-
erside of the tip without touching the orifice.
2 3 5
4
2nd stop
(to empty)
Recommended for liquids like water, buffer solutions,
diluted salt solutions, diluted acids and bases.
3. Pipetting
Tip
Deliver the liquid by gently depress-
ejector
ing the push button to the second
pusher
stop (4). The tip has now been emp-
tied. Release the push button to the
ready position (5).
Push the tip with the tip ejector
pusher.
Release the push
button slowly in order
to fill the tip without air
bubbles. Withdraw the
tip from the solution.
en
Deliver the liquid by
gently depressing
the push button to
the second stop.
PD 01911 / A020718 / 1150.3