Inhaltsverzeichnis
Werbung
◾
To Detach
Depress the battery-release button in the battery compartment.
Fig. J parts description see below:
J-1
Safety Key
J-2
Safety Key Slot
J-3
Battery-release Button
NOTICE:
Make sure that the latch on the mower snaps
into place and that the battery pack is secured to the
mower before starting operation.
STARTING/STOPPING THE MOWER
WARNING:
The operation of any lawn mower can
result in foreign objects being thrown into your or other's
eyes, which can damage eyes severely. Always wear safety
glasses while operating the mower, or while performing
any adjustments or repairs on it.
WARNING:
Ensure that other people and pets remain
at least 30m away from the mower when it is in use.
WARNING:
The blade will continue to rotate for a few
seconds after the mower is turned off. Allow the motor/
blade to stop rotating before starting it again. Do not rapidly
turn the mower off and on.
DANGER:
Rotating blades can cause serious injury.
To prevent serious injury, remove the safety key when
the mower is unattended, or when adjusting, cleaning,
servicing, transporting, lifting, or storing the mower.
NOTICE:
The motor cannot be started unless:
◾
The handle is locked into one of the three operating
positions, see ADJUSTING THE FOLDABLE HANDLE. .
◾
The side rails are fully extended (Fig. K).
◾
Both green handle-locking clamps are securely closed
(Fig. L).
CAUTION:
Do not attempt to override the operation of the
safety button and bail switch.
To Start (Fig. M1 & M2)
NOTICE:
To prevent serious injury, we recommend you to
start the mower with self-propel function off.
START THE MOWER WITH SELF-PROPEL FUCTION
ON (Fig. M1)
1) Attach the battery pack to the mower, insert the
safety key into the key slot and close the battery
cover.
56 VOLT LITHIUM-ION CORDLESS MOWER — LM1900E/LM1900E-SP
2) According to Fig. M1, depress the safety button down.
3) Pull the bail switch upward to meet the handle and
release the safety button.
4) Depress one of the self-propel switch.
5) With the self-propel and safety button switch
depressed, then turn the self-propel speed-control
knob until you hear a "click".
START THE MOWER WITH SELF-PROPEL FUCTION
OFF (Fig. M2)
1) Attach the battery pack to the mower, insert the safety
key into the key slot and close the battery cover.
2) According to Fig. M2, depress the safety button down.
3) With the safety button depressed, pull the bail switch
upward to meet the handle and release the safety button.
To Stop (Fig. N)
1) Fully release the bail switch.
2) The electric brake in the Automatic Braking
Mechanism will stop the blade rotation within 3
seconds of the bail switch release.
3) Turn the self-propel Speed-control knob off until it
can't be rotated.
VARIABLE-SPEED SELF-PROPEL SYSTEM
(only for model LM1900E-SP)
LM1900E-SP mower is equipped with variable-speed self-
propel capability. This system is independent of the blade
On-Off switch. it is not dependent on blade rotation.
To operate the system without blade rotation (Fig. O1)
1) Press the one of self-propel switches.
2) Turn the self-propel Speed-control knob until you
hear a "click".
To turn the self-propel off, release the self-propel switch
and Turn the self-propel Speed-control knob off until it can't
be rotated. (Fig. O2)
WARNING:
To reduce the risk of injury, never attempt
to override the operation of the switch or self-propel
system. Use the self-propel for its intended purpose only.
LED HEADLIGHTS (Fig. A-9)
Press the switch button 1s(Fig. C-23) to turn on/off the LED
headlights in the front of the battery compartment.
FULL-GRASS INDICATOR (Fig. P1 & P2)
THE GRASS BAG IS NOT FULL (Fig. P1).
THE GRASS BAG IS FULL (Fig. P2). Stop the mower and
remove the battery pack, clean your grass bag.
EN
15
Werbung
Inhaltsverzeichnis
