Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications; Attachments/Accessories; Operation; Before Operation - Toro TimeMaster 76 cm Bedienungsanleitung

76 cm
Vorschau ausblenden Andere Handbücher für TimeMaster 76 cm:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Figure 8
Upper handle
1. Adjustment for the
self-propel drive
2. Traction-assist handle
3. Blade-control-bar lock
Figure 9
1. Grass bag
2. Rear-discharge plug
(installed)
g289303
4. Blade-control bar
5. Ignition key (electric-start
model only)
6. Ignition switch
(electric-start model only)
or toggle switch (standard
model only)
g017219
3. Side-discharge chute
4. Battery charger
(electric-start model only)

Specifications

Model
Weight
64 kg
21810
(140 lb)
66 kg
21811
(145 lb)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
Always shut off the machine, remove the ignition
key (if equipped), wait for all moving parts to stop,
and allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
functioning properly.
Always inspect the machine to ensure that the
blades and blade bolts are not worn or damaged.
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
Contact with the moving blade will cause serious
injury. Do not put your fingers under the housing
when adjusting the cutting height.
9
Length
Width
165 cm
81 cm
(65 inches)
(32 inches)
Height
114 cm
(45 inches)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2181021811

Inhaltsverzeichnis