Emergency Lowering; After Use Each Day; Hour Meter - Upright MX19 Betriebsanleitung

E
M E R G E N C Y
!
If the platform should fail to lower, NEVER climb down the elevating assembly.
Stand clear of the elevating assembly while operating the Emergency Lowering Valve Knob.
The Emergency Lowering Valve Knob is located
beside the ladder at the rear of the machine.
1. Open the Emergency Lowering Valve by pulling and
2. To close, release the knob. The platform will not ele-
!
Never tow faster than 0,3 m/sec. (1 ft./sec.).
A
F T E R
1. Ensure that the platform is fully lowered.
2. Park the machine on a firm level surface, preferably under cover, secure against vandals, children and
3. Turn the Chassis Key Switch to OFF and remove the key to prevent unauthorized operation.
H
O U R
To access the hour meter function perform the following steps.
1. Climb into the basket (with the machine powered up)
2. Push the platform emergency stop button.
3. Hold down the following buttons, Jib and Upper Boom Lift.
4. While holding the buttons twist the emergency stop button to return power to the machine.
5. "hr" will now be displayed on the readout, Pressing the right turn button will scroll through the accumu-
lated hours two digits at a time. For example, if pressing the right turn button once displays "20", pressing
it a 2nd time displays "58", and pressing it a 3rd time displays "hr", the elapsed time of operation is 2058
hours.
Page 10
Downloaded from www.Manualslib.com
L
O W E R I N G
W A R N I N G
holding the knob.
vate if the Emergency Lowering Valve is open.
W A R N I N G
U E
S E A C H
unauthorized operation.
M
E T E R
manuals search engine
!
!
D
A Y
Operation
Figure 5: Emergency Lowering
Emergency
Lowering
Valve Knob
Operation Manual