Muffler Screen; Fuel Tank Filter - Seto POWERATOR 1800 compact Gebrauchsanleitung

5. Install the spark plug.
6. Install the cover
Standard electrode color: tan color
Standard Spark plug: cR4HSB (NGK)
Spark plug Gap: 0.6-0.7 mm (0.024-0.028 in)

5. FUEL TANK FILTER

1. Remove the fuel tank cap and filter.
2. Clean the filter with solvent. If damaged, replace.
3. Dry the filter with a cleaning cloth.
4. Wipe the filter and insert it.
ATTENTION!
Be sure the tank cap is tightened securely.
Downloaded from www.Manualslib.com manuals search engine

6. mUFFLER SCREEN

DANGER!
Risk of burns
• The engine and muffler will be very hot after
the engine has been run.
• Avoid touching the engine and muffler while
they are still hot with any part of your body
or clothing during inspection or repair.
• maintenance or reparations are only to be
carried out after a complete cooldown.
1. Remove the cover.
2. Remove the muffler screen.
3. Use the flathead screw driver to pry the spark
arrester out from the muffler
4. Remove the carbon deposits on the muffler screen
and spark arrester using a wire brush.
5. Install the muffler screen.
6. Install the cover
1
31