Engine Oil Replacement - Seto POWERATOR 1800 compact Gebrauchsanleitung

2. ENGINE OIL REPLACEmENT

1. place the machine on a level surface and warm up
the engine for several minutes. then stop the engine
and turn the fuel cock knob to "OFF". turn the fuel
tank cap air vent knob clockwise.
2. Loosen the screw and remove the cover.
3. Remove the oil filler cap.
4. place an oil pan under the engine. tilt the genera-
tor to drain the oil completely
5. Replace the generator on a level surface.
6. add engine oil to the upper level.
7. Install the oil filler cap
8. Install the cover and tighten the screw
9. tighten the screw again.
10. Hang the side cover again and fix it.
Recommended engine oil: (see technical data)
Downloaded from www.Manualslib.com manuals search engine
ATTENTION!
• Be sure no foreign material enters the
crankcase.
• Do not tilt the generator when adding engine
oil. This could result in overfilling and damage
to the engine.
• Clean the oil filter every other 100hr.
• Used engine oil is to be given to recycling.
oil filter
29