Magellan ToughCase Bedienungsanleitung Seite 7

The ToughCase GPS receiver and your iPhone
or your iPod touch are both charged when
Master Power switch is on, a USB cable or
USB power adapter is connected and the
power mode is set to Battery Only or
Battery+GPS.
ToughCase Battery Status. The four
LEDs at the bottom of the ToughCase GPS
receiver display the battery charge when the
battery button (below the LEDs) is pressed.
Battery Charge - LED Indicators
<10%
Charge
10 - 24%
Charge
25 - 49%
Charge
50 - 74%
Charge
75 - 100%
Charge
Using the ToughCase with Your
iPhone
The ToughCase GPS receiver has an earphone
opening just above the display lens and a
microphone opening at the bottom. To use
your iPhone as a cell phone while it is
installed in the ToughCase GPS receiver, just
hold the top of the ToughCase GPS receiver
to your ear and speak normally.
en 7
Downloaded from www.Manualslib.com manuals search engine