Led Indication - Honeywell Accentic Montage- Und Bedienungsanleitung

Mounting and Operating Instructions - proX2-reader "Accentic" with keypad
10.3

LED indication

The LEDs and the buzzer are controlled over a bus system. The definition for each is specified in the
main software and not at the reader.
At readers with Clock/Data interface the yellow LED lights permanently and can not be switched off.
At readers with RS-485 interface the yellow LED can be switched dark via software.
green
yellow
red
10.4 Access control function
Mark the actual settings of your system
0....9
Enter PIN or door code (RS-485 only)
and
or
Hold the data carrier in the reading field
ID
10.5 Activate control functions/macros
r
Press the "X" button
0....9
Enter PIN or door code
and
or
ID Hold the data carrier in the reading field
0....9
Enter the function number (macro number)
3
or
For more informations see Supplementary Functions IQ MultiAccess
(P32205-46-0G0-xx)
Color Basic
condition
yellow on
yellow off
green on
red on
green
red
red
r
Confirm with the "OK" or the "X" button.
"
After reading
a card or after
a keystroke
Operation / ready to read
Device is idle
PIN-Code or door code entry is active
(only possible with RS-485 interface)
Permanently released
Permanently blocked
on Door release
on ID card not authorized
blinking Read error
(RS-485 only)
Meaning
possible
possible
"
31