Setup - Configuration - Mbnled Pro Controller Rgbaw Multi 3G+ L513513G5 Bedienungsanleitung

，SETUP – CONFIGURATION –
In case you want to control all output channels only with one DMX channel, then you should set
monochrome setting to enable.
，SETUP – CONFIGURATION – OVERHEAT
Here you can enable or disable the overheat protection. Select the function with the UP-DOWN buttons and
press ENTER to save your choice.
You can leave this mode at any time without saving changes by pressing the ESC button.
Overheat protection ENABLE: At a temperature over 80° C the device will switch off the outputs.
MBN GmbH, Balthasar-Schaller-Str. 3,
Downloaded from www.Manualslib.com
As soon as the device has cooled down to 75° C, the outputs are switched
on again.
manuals search engine
Bedienungsanleitung / Users manual
MONOCHROME，
PROTECTION，
86316 Friedberg - Germany
www.proled.com
46