MBNLED PRO CONTROLLER RGBAW MULTI 3G+ L513513G5 Bedienungsanleitung Seite 43

，SETUP – CHANNELS –
Maximum channel intensity adjustment (128-255)
Here you can enter the maximum value for the specific channel. The channel output will not get above the
adjusted maximum value.
Press the UP-DOWN button to choose the desired channel.
Press the ENTER button to change the value of the choosen channel. With the UP-Down buttons it is
possible to change the value by 1.
Pressing the ENTER button again, you go back where you can choose the channel.
，SETUP – CHANNELS –
Default channel intensity adjustment (0-255).
Here you can enter a default value. After switching on the device, this value will be present at the output
(fixed colour adjustment – default colour). Select the channel with UP/DOWN-buttons and press ENTER-
button. With the UP/DOWN-buttons you can now adjust the default value of selected channel.
MBN GmbH, Balthasar-Schaller-Str. 3,
Downloaded from www.Manualslib.com
MAXIMUM，
DEFAULT，
manuals search engine
Bedienungsanleitung / Users manual
86316 Friedberg - Germany
www.proled.com
43