MBNLED PRO CONTROLLER RGBAW MULTI 3G+ L513513G5 Bedienungsanleitung Seite 37

To unlock the device press DOWN- and ESC-button together and hold them pressed about three sec. The
device will be unlocked:
，INPUT CONTROL MODES
The device can work with different type of input signals: DMX-512/RDM, 0/1-10V, DALI.
The input control mode can be set by placing the jumper on right position at PCB.
See page 33 till 36.
，INPUT CONTROL MODE –
The device works in DMX mode, if the jumper on the PCB is in correct state.
See page 36.
SETUP –
DMX –
MANUAL –
SINGLE –
MASTER –
MBN GmbH, Balthasar-Schaller-Str. 3,
Downloaded from www.Manualslib.com
，
Access to the setup menu items
Address (1-507) and slave address (1-20)
Desired colour can be adjusted manually with the buttons
Standalone programs can be selected
Standalone programs can be selected and the DMX signal is sent to additional devices for
synchronization.
manuals search engine
Bedienungsanleitung / Users manual
DMX，
86316 Friedberg - Germany
www.proled.com
37