MBNLED PRO CONTROLLER RGBAW MULTI 3G+ L513513G5 Bedienungsanleitung Seite 35

，SWITCHING
When the device is connected to mains supply, the dimmer is ready for operation.
During initialization the MBNLED Logo is displayed for a short time.
After 3 seconds the display proceeds automatically. The controller is now in one of the five main modes.
DISPLAY
The display is divided in three parts:
LEFT:
MIDDLE:
RIGHT:
Generic Information
Top right of display:
MBN GmbH, Balthasar-Schaller-Str. 3,
Downloaded from www.Manualslib.com
ON，
data of the current mode are shown
bar graph for the outputs
generic information of the device
NO LED POWER –
OVERHEAT –
WRONG CONFIG –
manuals search engine
Bedienungsanleitung / Users manual
No voltage for LED units is measured
The device is above the rated maximum temperature
Internal wiring CA/CC on the power board not correct
86316 Friedberg - Germany
www.proled.com
35