MBNLED PRO CONTROLLER RGBAW MULTI 3G+ L513513G5 Bedienungsanleitung Seite 44

Bedienungsanleitung / Users manual
，SETUP – CHANNELS – LINEAR
CHARACTERISTIC，
Here you can select the output characteristic. With the UP/DOWN-buttons you can set LINEAR dimming
characteristic OFF or ON. Press the ENTER-button to save the settings and leave this menu.
You can leave this menu at ny time without saving changes by pressing ESC-button.
，SETUP – CHANNELS – WHITE
BALANCE，
Here you can switch the white balance function off or on. Press ENTER-button to save the setting and leave
this menu.
You can leave this mode at any time without saveing changes by pressing ESC-button.
，SETUP – CHANNELS – OUTPUT
FREQUENCY，
LEDs are controlled by a PWM signal (pulse width modulation). The PWM frequency can be set in this menu.
You can choose frequencies stepless in a range from 80 Hz up to 1200 Hz.
Normally the highest value is the best, but different LED modules has different best settings. For example
high power LED 's light characteristic is better if the output frequency is lower.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany 44
www.proled.com
Downloaded from www.Manualslib.com manuals search engine