Connecting The Power Supply - G&D DVIMUX8-USB Installation Und Bedienung

Installation
Keyb./Mouse
Figure 3: Interfaces to connect the computers
Line In:
connected to the KVM switch, use one of the audio connection cables (Audio-M/M) to
connect the computer's Line Out interface to this interface.
Line Out:
audio connection cables (Audio-M/M) to connect this interface to the computer's
microphone input.
USB 2.0:
computer's USB interfaces to this interface.
DVI-I CPU:
video cable (DVI-D-DL-M/M). If the computer has an analog VGA output, use an
analog video cable (VGA-M/DVI-A-M).
Connect the (first) video output of the computer to this interface.
NOTE:
DVI-I CPU x.2

Connecting the power supply

Keyb./Mouse
Figure 4: Interfaces to connect the power supply
Power:
Power socket of the KVM switch.
6 · G&D DVIMUX8-USB
Downloaded from www.Manualslib.com
Monitor 1 DVI-I CPU 1.1
CON CPU 1
Line In Speaker Line In Line Out USB 2.0 Line In
If the audio signals of the computers are to be output over the speakers which are
If you want to use a microphone or a headset at the console, use one of the
Use one of the USB connection cables (USB-AM/BM) to connect one of the
If the computer is equipped with a DVI-D video output, use a digital
If you purchased the multi-channel variant of the KVM switch, connect the
interface to the correspending video output of the computer.
Monitor 1 DVI-I CPU 1.1
CON CPU 1
Line In Speaker Line In Line Out USB 2.0 Line In
Connect the power cable (PowerCable-2 Standard) to a power outlet and the
manuals search engine
DVI-I CPU 2.1 DVI-I CPU 7.1
CPU 2 CPU 7
Line Out USB 2.0 Line In Line Out USB 2.0 Line In
DVI-I CPU 2.1 DVI-I CPU 7.1
CPU 2 CPU 7
Line Out USB 2.0 Line In Line Out USB 2.0 Line In
DVI-I CPU 8.1
CPU 8
Line Out USB 2.0
DVI-I CPU 8.1
CPU 8
Line Out USB 2.0