Normal Operation - Klarstein Bellevin 12 Duo Handbuch

OPERATION
Control panel and key functions
1 Switch to select the upper or lower range.
2 Displays the upper range temperature.
3 Press the buttons to adjust the temperature.
4 Displays the temperature of the lower range.
5 Press the buttons to turn the light on and off.
Operation
• The internal temperature can be adjusted in 1 °C increments from 12-18 °C (upper
half) or 8-18 °C (lower half).
• After turning on the unit, the display first shows the current ambient temperature and
then changes to the indoor temperature.
• If you change the temperature, the newly set temperature will flash on the display
for 5 seconds. The display will then return to the current indoor temperature.

Normal operation

When the cooler is operating at full power, the two LEDs on the circuit board flash. The
red LED indicates the status of the current input. The green LED indicates the output status
of the cooling system.
In the meantime, the fan is operating inside the unit. When the door is opened, the light
under the temperature control turns on automatically. The temperature range for the unit
is 12-18 °C (upper half) or 8-18 °C (lower half). When the set temperature is reached
inside the appliance, the automatic temperature control system starts to operate and
maintains the set temperature.
EN
15