EMAG Emmi-04D Bedienungsanleitung Seite 13

to set the cleaning time required. Time needed depends on the degree of contamination of the objects.
(Adjustment times 1-4 Minutes) After the desired cleaning time has elapsed, remove the cleaned materi-
al with the basket from the tub and rinse under running water. If you are done with the unit, unplug the
power cord. If the unit is not to be used for an extended period of time, it is recommended to empty the
tub and dry it with a cloth.
5. CLEANING CONCENTRATES
Examples for the cleaning of objects by means of ultrasound:
• Jewelry, hearing AIDS parts, eyeglasses (please note: Avoid direct contact of the glasses with
the stainless steel bottom!)
• Ink Pens, Drawing Tools
• Dental Prostheses, Braces
• Shaving heads of electric shavers
• Precision mechanical parts, weapon parts (e.g. magazines, cartridge sleeves, ring pins, springs
Cleaning accessories
For most respective cleaning processes there are different chemical cleaning concentrates which For most respective cleaning processes there are different chemical cleaning concentrates which
intensify the cleaning process. You can buy these cleaning accessories from the source where you have
bought your equipment, or you may buy it at www.emag-germany.de.
EMAG AG recommends the following concentrated concentrates for the respective purpose:
EM 070 Dental cleaner for dental application and cleaning of dentures at home. Application: 1 to
2%.
EM 080 Universal cleaner Eyeglasses, jewelery, optical glasses, ink crayons smaller tools and instru-
ments such as small precision parts, shaver heads. Application: 1 to 5%. (except for contact
lenses).
EM 100 Disoxidation cleaner - Concentrate for disoxidation of silver etc.). Application: neat.
EM 200 Concentrate for disinfection of instruments. Application: 1%.
EM 202 Intensive cleaner - Steel, stainless steel, precious metal, instrument, glass, plastic etc.
EM 300 Metal cleaner – extreme cleaner for di cult cases (supports, hinges, wheapon parts, bullets,
brass etc.). Application: 1 to 3%.
EM 303 PC Board cleaner. Application: 1 to 5%.
EM 404 Aluminum and diecast cleaning (carburators, engine blocks, cylinder heads). Application: 1
to 5%.
EM 600 Special cleaner (Glass, rubber, ceramics, plastic, metal and more). Application: 1-10%.
EM 700 Non-ferrous metal cleaner (Bullet casings, PC boards from maintenance, Jewellery, Clock
parts). Application: 5%.
If cleaning accessories of other manufacturers are used we cannot take any liability for the cleaned
goods. For detailed information you can contact us at any time.
Onlineshop: ultraschall-welt.de
13