ASROCK H170 Combo Handbuch Seite 22

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 17)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 8)
(SATA3_1:
see p.1, No. 10)
(SATA3_2:
see p.1, No. 9)
(SATA3_3:
see p.1, No. 11)
(SATA3_4:
see p.1, No. 15)
(SATA3_5:
see p.1, No. 14)
Serial ATA Express
Connectors
(SATA_E_1:
see p.1, No. 12)
(SATA_E_2:
see p.1, No. 13)
USB 2.0 Headers
(9-pin USB_9_10)
(see p.1, No. 19)
(9-pin USB_11_12)
(see p.1, No. 18)
20
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
+5V the chassis speaker to this
header.
1
PLED+
PLED+
PLED-
hese six SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. he SATA3_0,
SATA3_1 are shared
with the SATA_E_1. he
SATA3_2, SATA3_3 are
shared with the SATA_
E_2.
*If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
Please connect either
SATA or PCIe storage
devices to these
connectors.
here are two headers
USB_PWR
P-
on this motherboard.
P+
GND
DUMMY
Each USB 2.0 header can
support two ports.
1
GND
P+
P-
USB_PWR