Operation; Mode Of Operation - Meister MOF1200-1 Originalbetriebsanleitung

8 – Operation
Safety check
Before use check that the router head
and any fitted parts are securely seated.
Connecting to power supply
Before use check that the mains voltage
is correct and the mains supply is fitted
with suitable fuses (see „Technical Data").
Insert plug in socket: the router is now
ready to operate.
Switching on
Fig. 20: Press the safety switch (2),
press and hold the on/off switch (18).
The safety switch does not have to be
held. The router will start.
Regulate the revolutions (Fig. 15)
Setting the revolution regulator
(1 = minimum, 7 = maximum revolu­
tions).
Switching off
Release the On/Off switch (18). The router
stops.
Risk of injury due to continuous
operation of router head! Wait
until the motor has come to a com­
plete standstill!
9 – Mode of operation
Preparing the workpiece
Remove foreign bodies (nails, screws,
mortar residues, etc.) from the workpiece.
as they are a hazard for the router heads.
66
MW-5458010-Bedien-2004.indd 66 MW-5458010-Bedien-2004.indd 66
Risk of injury, if workpiece flies
out! Securely fasten workpiece!
Always clamp workpiece in a vice or
fasten to the workbench with cramps.
Ensure routing path is clear!
Basic work procedure
Risk of injury! Never work with
one hand only!
Direction of feed, when side­routing
Risk of injury from recoil! When
side­routing, maintain correct
direction of feed!
When side­routing, the work piece must
always lie to the left of the router head,
facing in the direction of feed!
Do not rout backwards!
Trial routing
Good work results depend on
• correct speed and
• correct feed rate.
These values depend on the kind of
wood used, the shape of the router head
and the quantity of material removed.
27.04.20 10:05 27.04.20 10:05