Safety Instructions Relating Specifically To The Equipment - Meister MOF1200-1 Originalbetriebsanleitung

• Do not use the power tool for a pur­
pose it is not designed for.
• When working outdoors, we recom­
mend you wear sturdy
shoes.
• Secure the work piece. Use clamping
mechanisms or a vice to securely fas­
ten the work piece. This is safer than
holding it in your hands.
• Follow the instructions regarding oil­
ing and changing tools.
• Regularly check the power cable of
the power tool and, if it is damaged,
have it replaced by a recognised spe­
cialist.
• Check the extension cables regularly
and replace if they are damaged.
• Keep the handles dry, clean and free
of oil and grease.
• Check the power tool for any damag­
es.
• Before continuing to use the power
tool, protective mechanisms and
lightly damaged parts should be care­
fully examined for perfect and proper
functioning.
• Check whether parts have been dam­
aged. All parts must be mounted cor­
rectly and meet all requirements in
order to ensure perfect operation of
the power tool.
• Damaged protective mechanisms and
parts must be repaired or replaced
properly by an authorised specialist
workshop if no other course of action
is specified in the operating instruc­
tions.
62
MW-5458010-Bedien-2004.indd 62 MW-5458010-Bedien-2004.indd 62
• Damaged switches must be replaced
by a customer service workshop.
CAUTION! The use of other tool
inserts and other accessories
may pose a risk of injury.
6 – Safety instructions relat­
ing specifically to the
equipment
• Use only sharp, undamaged router
heads!
• The router must always be started
first before the router head is applied
to the workpiece!
• When working, ensure that the base
plate is resting squarely on the sur­
face!
• When working, feed the router care­
fully and evenly. Forcing the feed rate
may lead to accidents and premature
wear to the router head!
• empty connected vacuum cleaner at
regular intervals. Blocked extractor
ducts cause chips to collect in the
work zone!
• Do not put the router down until the
motor has come to a dead stop.
• Do not fasten the router to a jig or fix­
ture. It is not intended for stationary
use!
• Guide the vacuum­cleaner hose
so that it does not obstruct the rout­
ing work and cause the operator to
trip!
27.04.20 10:05 27.04.20 10:05