Abit AN-M2 Kurze Installationsanleitung Seite 32

[System]: The password is required each time the computer boots up.
Don't forget your password. If you forget the password, you will have to open
※
the computer case and clear all information in the CMOS before you can start
up the system. But by doing this, you will have to reset all previously set
options.
MPS Version Ctrl For OS
This item specifies which version of MPS (Multi-Processor Specification) this motherboard will
use. Leave this item at its default setting.
Delay For HDD (Secs)
This item allows the BIOS to support some old or special IDE devices by prolonging this delay
time. A larger value will give more delay time to the device for which to initialize and to prepare
for activation.
Full Screen LOGO Show
This item determines to show the full screen logo when booting.
2-8 AN-M2/AN-M2HD