Using The Device; Replacing Probe Cover - Fora IR20 Benutzerhandbuch

Using the Device

Replacing Probe Cover

Step 1
Check the probe cover is clean and
new.
Step 2
Attach new probe cover into the probe.
Now, you can start to test your ear
temperature.
NOTE
If a probe cover is not attached on the probe, LCD will show "
a new probe cover is firmly attached to the probe.
The used probe cover should be removed after each measurement by a
clean and new probe cover to ensure accuracy reading.
For hygiene use, attach a new probe cover each time and do not touch
its tip.
18
" until