Automatic Switch-Off; The Heat Setting; Automatic Heat Up; Power Function - AEG HK634150XB Benutzerinformation

4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
• you spill something or put something
• the hob gets too hot (e.g. when a
• you use incorrect cookware. The
• you do not deactivate a cooking zone
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
3 - 4
5
6 - 9

4.3 The heat setting

Touch
Touch
Touch
deactivate the cooking zone.
4.4 Activating and
deactivating the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
Use sensor field:
Downloaded from www.Manualslib.com
you activate the hob,
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
symbol comes on and the cooking
zone deactivates automatically after 2
minutes.
or change the heat setting. After
some time comes on and the hob
deactivates.
The hob deacti-
vates after
6 hours
, 1 - 2
5 hours
4 hours
1.5 hour
to increase the heat setting.
to decrease the heat setting.
and at the same time to
manuals search engine
To activate the outer ring: touch the
sensor field. The indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.

4.5 Automatic Heat Up

If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch ( comes on).
Immediately touch (
Immediately touch until the correct
heat setting comes on. After 3 seconds
comes on.
To deactivate the function: touch

4.6 Power function

This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch
. comes on.
To deactivate the function: touch
.
4.7 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
ENGLISH 9
comes on).
.
or