Sun SWB 340 Betriebsanleitung Seite 100

26
100
Downloaded from www.Manualslib.com
5-63
5-64
5-51
5-65
manuals search engine
Operation
Message E9
Message E9 means that at least one error has occurred
during the optimisation cycle (System messages
7.1).
— Abort the optimisation program by pressing the
STOP key and, if desired, start optimisation once
again.
Fig. 5-63 MINIMISATION "Un.12"
— Clamp the wheel on the balancer.
— Position the valve so that it is exactly perpendicular
to and above the chuck.
— Confi rm the valve position by pressing menu key
26.
The MINIMISATION "Un.13" is displayed (Fig. 5-64).
Fig. 5-64 MINIMISATION "Un.13"
START is signalled on the screen.
— Perform a measuring run.
A measuring run is performed.
The BALANCING screen is displayed (Fig. 5-51).
Finish weight Minimisation
Fig. 5-51 BALANCING
— Balance the wheel according to the instructions
displayed.
If the wheel quiet running conditions cannot be
improved, the following message is displayed:
Fig. 5-65
H0 Wheel running conditions cannot be improved
by optimisation.
F