Inhaltsverzeichnis
Werbung
min.
500 mm
10
Downloaded from
www.Manualslib.com
3-1
min. 2200 mm
3-2
manuals search engine
Introduction
3.0 Introduction
This wheel balancer combines advanced, high-
performance technology, robustness and reliability with
very simple, user-friendly operation.
The slow rotation speed of the wheel ensures a
completely safe use.
The colour monitor displays set data, operating modes,
values measured, symbols and text of the operator
guide. The touch screen monitor also contains all the
Operating Controls.
Always work in a clean area and with clean wheels;
preventively remove debris and old counterweights
from tyres and rims. That way proper mounting of the
wheel and an optimal balancing result can be achieved.
WARNING:
THIS MACHINE HAS ONLY ONE OPERATING
STATION (A, Figure 3-1). THE OPERATOR
IS RESPONSIBLE FOR WORKING AREA
LIMITATIONS AND FOR ANY CONSEQUENCE
C O N N E C T E D W I T H T H E U S E O F T H E
EQUIPMENT.
THE OPERATOR MUST REMAIN NEAR THE
MACHINE, IN THE CORRECT WORK POSITION;
AT THE CONTROL UNIT SIDE (A, Figure 3-1).
CAUTION:
ONLY THE OPERATOR IS ALLOWED TO ACCESS
THE WORKING
AREA.
Do not allow unauthorised people to approach the
working area (Fig. 3-2).
Application
The off-the-vehicle wheel balancer is designed for
dynamic and static balancing of cars and light-duty
trucks wheels, that fall within the limits stated in the
F
technical specifi cations (
2).
This is a high accuracy measuring device. Handle
with care.
3.1
Conditions
During use or long term storage, the following values
should never be exceeded.
Temperature range 0-50 °C
Humidity range
10-90%
without condensation
Werbung
Inhaltsverzeichnis
