Functioning Modes; Mode Selection - Valpes VT Serie Installations- Und Bedienungsanleitung

Functioning modes

Selection confirmation
Description
 Wireless local control (Bluetooth
requires a smartphone or a tablet with the
 Weekly scheduler (Bluetooth
This mode requires a smartphone or a tablet with the
 Wire control: electric control - permanent (on-off or 3-modulating point) or pulse.
 Positioning (learning mode) : this mode is needed for storing limit positions of the actuator.
 Positioning : allows the control of the actuator with a 0-10V or 4-20mA setpoint signal.
Functioning mode selection
The « Next Mode » button scrolls the functioning modes in the following order:
When the mode is selected, press « OK Mode » to confirm.
DSBA3600 • Rév. 08/03/2018
Downloaded from www.Manualslib.com

Mode selection

® ) : allows the use of the actuator from 20m maximum (in open field). This mode
) : thanks to AXMART
®
manuals search engine
Local control (Bluetooth
Weekly scheduler (Bluetooth
Wired (permanent & pulse signal)
Positioning (learning mode)
Positioning
Keyboard local control
X software.
®
A MART
, you can assign up to 20 repeatable tasks to each actuator.
®
X ® software.
A MART
Bluetooth ® (local control)
↓
Bluetooth (schedule)
®
↓
Wire control
↓
Learning mode (positioning)
↓
positioning
ENGLISH
UK
)
®
)
®
(available soon)
25